Products

bob_beck_mag_pulser-4.jpg

bob_beck_mag_pulser-4.jpg

bob_beck_mag_pulser-3.jpg

bob_beck_mag_pulser-2.jpg

Bob Beck Magnetic Pulser

Auto-Pulsing • Auto Off • Auto Off LED Indicator.

Product Code: BB01
Availability: In Stock

Price may change due to exchange rate.

$ 499.00


Auto-Pulsing • Auto Off
No manual button pushing!

**New**
Auto Off LED Indicator


**New**
16AWG ERSE Wet-wound, Perfect Lay inductor coil mounted to a paddle style Finland Birch Plywood handle.

The pulse coil has an additional coating of high temp black plasic-rubber for extra Inslulation.

Features:

My Bob Beck Mag Pulser features an inductor coil who's cable can be unplugged from the device and an internal Auto-Off switch. The Auto Off function is a safety precaution to prevent accidental overheating of the inductor coil or the internal power supply. The fact that one can remove the coil from the chassis, allows the user for convenience purposes, to unplug the coil from the machine.

Unfortunately I have no way to measure the gauss, but the coil will shoot a 1.5 inch fender washer across the room, or nearly from the floor to the ceiling. Sufficient capacitor charge for a minimum 6000 Gauss magnetic pulse (330V-340V) occurs in about 7 seconds. A 363V capacitor charge and maximum pulse capability is achieved in 12 seconds. I can say with relative certainty, that this is one of the more powerful mag pulsers of this type available for sale anywhere!

Specifications:

Input Voltage: 110V/120V
Output voltage to coil: 330V - 360V
Power Consumption: 50 Watt

Inductor Coil: 16AWG 2.5mH

Capacitor: Glan 450V 900uF PhotoFlash Capacitor

Capacitor Charge Time: 5 seconds to 330V+.

Capacitor Life: Minimum 100,000 discharges.
Weight: 6 lbs. 15oz.
Auto Off *
Pulse Frequency Range: From 1 pulse every 12 seconds to 1.5 pulses per second.
Runtime: MAX Run Time 30 minutes. A 30 minute cool down time required before reuse. This is regard to the machine only.
* To prevent the possibility of critical components overheating, the mag pulser will shut itself off after approximately 5-6 minutes of runtime. To start a new time cycle, simply push and release the metal toggle switch. After a total of 30 minutes of operation, or if the coil gets too hot to comfortably hold in one's hand, the operator must turn the machine off and allow it to cool down for a period of 30 minutes. Operating the device at a faster rate than 1 pulse every 5 seconds, will lessen the effectiveness of the magnetic pulse and cause the coil to heat up more quickly. The inductor coil can be placed into a freezer for faster cooling.

I have thoroughly tested this machine and am not only impressed with its design, but also have confidence in its ability to perform. One positive result I can already report, is that this pulser has cleared up a fungal infection I had on my right thumb for over a year now. I'm now using it on the heals of my feet also with good results. I will be able to wear flip-flops this summer... yeah!

If operation from a 12V power supply is desired, one can accomplish this by using a minimum 100W, 12V - 110V/120V power inverter.

Warranty:

My Bob Beck Mag Pulser is guaranteed to be free of defects and to operate properly for a period of one year from the date of purchase. Please refer all servicing back to Steffan.

As always, I strive to make the best and safest machines possible. Consequently from time to time unannounced improvements in the machine's design may occur.

DISCLAIMER

The electrical devices we sell are meant for experimental research only & not meant to diagnose, treat or cure any disease or condition.  Please see a medical professional if your are ill or in poor health.  Some of the devices we sell are vintage medical devices with old components that can fail at any time.  Even though the vintage violet ray machines we sell have been tested and in some cases rewired and may contain replaced components, there is a risk of electric shock.  Should one come into contact with ground (any conductive object or surface that is connected to earth) and be holding or touching the metal electrode with any part of the body while a violet ray machine is operating, a serious and potentially lethal electric shock can be received.  If one intends to operate these antique violet ray devices, proper safety precautions  must always be observed.  We assume that any operator of such a device will take the necessary steps  to do his or her own research as to how to operate such a device in a safe manner.  Violet ray machines produce high frequency, high voltage that will interfere with with cardiac pace makers.  Any person that has a heart rhythm regulatory device (pace maker) must not operate a violet ray machine!!!  Such individuals must also maintain a substantial distance from these devices, otherwise a pacemaker can malfunction!  The radio frequencies that emanate from violet ray machines may interfere with television reception in your house and the television reception of your neighbors.  These devices can also interfere with wireless internet connections and interfere with internet routers and therefore you may be braking the law by using such devices. We assume no responsibility for any loss of property, electric shock, physical or psychological harm, or death as a result of operating a violet ray machine or other electrical device that was purchased from this web site or other online services.